Using a Thunderbolt to Ethernet adapter, I have been successfully using the PKnight Artnet to DMX Node ($69.99) to control my lighting rig with Mix16 Pro.   I have used this with a direct connection as well as through a router.  All that was required to connect was to manually adjust the IP Address, Subnet mask and router on the Thunderbolt connection in "Settings:Network" on my Mac and they connected right up.  You do have to make sure that the Thunderbolt connection is set at the primary (top) connection.   Below are the detailed steps I used.

1.  Connect your

Hello!When I use OSC layout which is official web provides, but it just work on "go","pre","next","stop",it doesn't show cue list, loaded flies, and controls volume!How to work it out?I am looking forward to ur reply, thanks!

You can use any device that supports Art-Net protocol over ethernet. For example Showtec NET-2/5 Pocket or Enttec ODE Mk3. USB devices are not supported.

Basic setup

With this setup you can place all your hardware (router, lighting device, cables, etc.) anywhere on or off stage and freely move around with your Mac, iPad or iPhone to setup your lights.

MIDI QUESTION: I have an iPad mini 5th gen running iOS14.2 and iMix16 32 channels. I would like to connect a MIDI footswitch to simply move back and forth on the Playlist and hit the GO button to cue videos, but I am lacking the knowledge to get this working. I would even be happy to hire someone to help me if I need to. I have a couple AirTurn products including the Airturn BT-200|S-6, as well as a Duo (and use them successfully with other programs like forScore). I have gotten the iMix to recognize the pedal,  but how

IMPORTANT!

• To use this feature MIDIPlayer X app must be installed and running.
• In MiX16 PRO this feature is disabled by default. You must enabled it first. Go to menu Options > Devices and Applications and tick MIDIPlayer X.
• Only one MIDI file can be played at a time.
• Selected MIDI files used in playlist cues will be saved into MiX16 PRO project and will not be loaded from original locations like audio, video and image files.

MIDIPlayer X app is available on Mac App Store.

Hi there! Just updated my Ipad (8 gen)to IOS 15.6.1. After the update I get no video out of Imix when I  have an Hdmi cable connected to my video projector. I’m using An original Ipad hdmi to lightning adapter.  There is sound though! I have a copy of Imix on my old Ipad and that works just fine with the same cable and projector. Any ideas what could be the problem?Since if today I have the last version of Imix on my Ipad. But that didn’t solve the problem.

MiX16 Show Cue can also be controlled from other iPadOS and iOS apps located on the same local device using a built-in URL scheme. This "URL scheme" allows others apps to send parameters into MiX16 Show Cue either during runtime or at app launch. Note that macOS does not support URL scheme.

Play next cue:

• mix16showcue://play/next
• mix16showcue://playnext (shorter version of url)

Set GO to cue:

• mix16showcue://set/go/<cue number>
• mix16showcue://setgo/<cue number>

Set GO and play GO:

• mix16showcue://go/<cue number>

Set previous or next cue:

• mix16showcue://set/prev
• mix16showcue://setprev
• mix16showcue://set/next
• mix16showcue://setnext

Pause or stop all cues:

• mix16showcue://pause/all
• mix16showcue://pauseall
• mix16showcue://pause
• mix16showcue://stop/all
• mix16showcue://stopall
• mix16showcue://stop

Set master volume:

• mix16showcue://set/master/<0 - 100>
• mix16showcue://setmaster<0 -

Control MiX16 Show Cue from OSC applications

• /mix16showcue/info - get basic information
• /mix16showcue/info/full - get full information
• /mix16showcue/setgo, <cue number> - set GO to desired cue
• /mix16showcue/go, <cue number> - set GO to desired cue and play it (trigger GO)
• /mix16showcue/playnext - play next cue
• /mix16showcue/pauseall - pause all cues
• /mix16showcue/stopall - stop all cues
• /mix16showcue/setprev - set GO to previous cue
• /mix16showcue/setnext - set GO to next cue
• /mix16showcue/setmaster, <master volume 0 - 100> - set master volume
• /mix16showcue/setlightingmaster, <master 0 - 100> - set lighting master
• /mix16showcue/playcue, <cue number> - play desired cue
• /mix16showcue/pausecue, <cue number> - pause desired cue
• /mix16showcue/stopcue,

I am testing Mix16Pro with a Laserworld ShowNet Ethernet interface, which I have configured to be in its ArtNet mode. I can see from the Ethernet LEDs that data is being transmitted, but nothing happens!

With i/f set to ArtNet, should Mix16 see it? Is there any way of confirming whether it can?

Cheers,

Andy

Hi,

I just bought iMix16 Band on my iPad and I just discovered it doesn't work on iPhones !

IMix16 is great with a NanoKontrol and I wish to use it with a smaller/cheaper device like iPhone 5 or 6.

Is it planned to make it iPhone compatible ?

Thanks

Philippe

Hi Gregor,

On the new MacBook MIX16 9.0 is not going well. Each time on startup, the output screen is located on the main screen and must be moved to the external screen (projection screen). Did several tests that did not give the desired result. Finally installed MIX16 8.7 and the problem was solved.

Can you help us out with the 9.0 version?

Thanks in advance!

Mathijs

getting a warning message. First time, It persisted through the entire show. 

How do i reset memory?  

did the power button and home key hard reset. 

hopefully that resolves it.

Here are download links of MIDI / OSC mapping files created by MiX16 PRO users. Mapping files are free to use and can be modified and improved. If you wish to share your mapping files with the world, please send them to info@mix16apps.com.

You need MiX16 GO or PRO version 9.1 or later.

In MiX16 PRO use MIDI Editor to open mapping file (menu Tools > MIDI Editor).

Gregor Krasevec

AKAI APC mini Mapping for 64 audio channels, playlist GO, stop all cues, set previous cue, set next cue and master volumes for audio, video and infinite channels.

Valerio Massimo

MiX16 apps for macOS version 9.0 or later have a lot of new and also some changed built-in default OSC commands.

Control MiX16 macOS apps from OSC applications

• /mix16apps/basicinfo - get basic information
• /mix16apps/fullinfo - get full information
• /mix16apps/playlist/setgo <cue_number> - set playlist GO button to desired cue number
• /mix16apps/playlist/go - trigger playlist GO button
• /mix16apps/playlist/stopall - trigger playlist Stop All Cues button
• /mix16apps/playlist/prevcue - select playlist previous cue
• /mix16apps/playlist/nextcue - select playlist next cue
• /mix16apps/stopall - stop all (playlist, all channels, image slide show and lighting scenes)
• /mix16apps/reset/playstatus - reset playlist cues and all channels play status (play button default

https://www.mix16apps.com/upload/files/MiX16_PRO_8.png?v=7

Hi Gregor,

We've recently started using the apps for a well known UK band as an autocue - using midi from the playback machine to cue video and image files on an ipad connected to an external display, and have had great success with it! The only thing that would improve the system for us is to have a default image in between videos being played, which for our purposes would be an image of the set list. At the moment someone is having to manually bring up that image between songs, which works but is obviously open to human

Would be really helpful to have a thumbnail visible for each video channel. I sometimes have to do live 'switching,' and having to use clip names/numbers only is really challenging and limiting.

When changing to a different external display, MiX16Pro (Mac) stops playing videos. It displays the first frame, but does not play the video. Only way I've found is to open each clip individually and click 'save.' Then it plays. Is this behavior normal? Makes it really hard to work on a set up offline, then show up at rehearsal ready to go, if I have to click through each and every clip just to get them to play.