I’m looking for some expert tutoring on MiX16 Pro. It could take place over Zoom. Willing to compensate. 

Please reach out to info@kiteflyerproductions.com

Best 

steve

I created a project with Imix Band 16 (v 8.2) at my Ipad9.

Exported to another Imix Band 16 (v 8.2) by dropbox, audio files by Itunes, Ipad5.

The program keep saying:

“OPEN PROJECT ERROR”

wrong content of the project file (data).

How can I fix it?

Hi! I'm using MiX16 PRO and in every channel, the option to set a 'Play range' isn't active. You can't type in the range, and it keeps dim like when there is no content loaded. Some suggestions?

I have been successful at sending and receiving OSC commands to and from a custom app.  I would like to break up a song time wise (say during a passage with lighting sounds) and send OSC commands to the app at this point.   I see that you can use cues with empty Durations and use the time to trigger the next one where upon the OSC is sent to the app.  Is this the only way? 

Hi all

Really enjoying getting to grips with ShowCue. I have no experience and even less understanding of OSC commands, and Grega has provided me with great reference documents. I have configured Showcue and it detects my behringer XR18 mixer- so the IP address and output port is correct.

I can now trigger ShowCue to change a channel fader using:

/ch/01/mix/fader, 0.5 as an OSC Output Command - Play Cue

In my Behringer XR18 I have a series of audio snapshots saved for our drama production with different settings for different microphones switched on and off throughout the production.

No

Hi, I'd like to know if it's possible control the Lampy Showtec light controller by Osc with iMix. I bought iMix16 Pro64. Thank you for your time.

MiX16 Show Cue for iPadOS, iOS and macOS supports keyboard actions. This means you can control the app with internal or external keyboard or any other external device (pedals, remotes, …) which are able to send keyboard commands.

Built-in keyboard actions for general functions:

• space, return (enter) or F5 - play next cue,
• escape or F6 - stop all cues,
• up arrow - set previous cue,
• down arrow - set next cue,
• F7 - rewind playing cues,
• F8 - toggle play / pause playing cues,
• F9 - fast forward playing cues,
• F10 - mute / unmute master volume,
• F11 - decrease

sometimes I need to freely turn down the volume of the current playing cue, so I've always a midi device connected with one fader assigned to the volume master control.

It would be a good idea if the fader turns down the volume of the current playing cue, instead of the master volume; something like a "current cue volume".

working in different spaces, sometimes the fixtures are plugged in a different way compared to the project; It could be a good idea the possibility to change the dmx output on each lighting channel (e.g. lighting channel 1 to dmx out 512)

I am considering the purchase of Mix16 Pro and have tested Mix16 Go.  A couple of questions arise:

I cannot seem to maximize the screen while inserting and editing cues.  

What is the volume setting for in the Cue editor.  Setting it stop any audio from playing (as opposed to leaving it blank).  Is there a reason for this?

Does the Pro version allow for moving up as well as down a playlist?

When setting the last cue to "end" mode, the playlist goes up to the first cue and plays instead of stopping the project.  

Finally, why is there

IPad Air (2022)  . iOS 16.6.1 (3) Audio channels. SFX only. No other apps running in background. 

I have an iPad Air running IOS 16.6.1. I have several .mp3 files loaded on channels and they all play, but one. It is a voice recording I made on Voice Memos. It will play when my audio adapter is not plugged in, but will not play when it is plugged in. As I mentioned all other channel play fine. Any ideas? I have show on Friday - Nov. 3rd. 

"The file couldn’t be opened because it isn’t in the correct format." keeps on showing, even on empty channels. All files are updated and linked or deleted, but it keeps giving this error on almost every channel. In the LOG file it shows old file names. Any ideas how to fix this?

Mix16pro Version 9.9.2 (19980)

Thanks! Arthur

When loading tracks from iTunes, changing the ANY of the metadata breaks the track. I mean, it's easy enough to avoid doing now that I know not to do it, but it's a frustrating problem to discover.

Q1. Why is there no sound when I set the music volume(in edit cue) to 100% in the playlist tab and press the go button? (But erase the volume level again, it can play at 100%.)

Q2. Can I specify a slow change or changingtime when going from cue1 (100%) to cue2 (50%) in pls?

I created a a new midi mapping because the program said I could not assign channels in iMix16 Remote mapping.  I have opened it and it is showing up with blue letters, so i am assuming that is the one opened.  I still get the message you cannot assign iMix16 Remote mapping no matter what I try.  What is going on?

for an audio track set with play-pause, the respective cues do not play-pause but play-stop.

it works in imix16 but not in mix16

I want to output Mix 16Pro 24 discrete Wav files to Dante Virtual Soundcard on a mac running that DVS, Mac OS 12.3.1. The far no success. Has anybody done this? I can only select dante Output from the app, no Dante channels are avail within the app.

Ziggy has created Elgato Stream Deck Profile which can be used with MiX16 GO and PRO.

Download it here.

Installation Instructions Download and unzip profile file and double-click on it (Elgato software must be installed). Profile will be added to existing profiles. Or use Import feature in Elgato software. With Import feature you can also change the placeholders for the different buttons to customize the profile to fit your needs.