HI all- slowly and steadily getting my head around this wonderful app Mix16 Show Cue.

I can use it standalone on iPad/Mac for our drama group and simply press space bar to trigger sounds.

Or… I can link it to our Behringer Mixer and switch mics on and off with OSC commands.

However, due to a gap in my knowledge, when I link it to our mixer to trigger microphones on and off, the ability to advance to the next cue via the space bar disappears.

Ideally, I would like to be able to combine the sound cues with microphone

Hi all

I know that in Mix16 Show Cue there are four simple kinds of automation from one cue to another.

However this is the scenario: I want to play one audio cue but it may be for slightly different duration (eg between scene changes) but then when I press go, for the current cue to fade elegantly and the next cue be triggered and play. Is this possible in any way?

I have a strange issue and as far as I can see it is down to INTEL vs SILICON. I am running MiX16 PRO on my desktop (M3 Ultra Desktop), creating the playlist etc and all is fine. The files are stored in dropbox folder on the machine. I have also tested with files in another area and am confident that the file path for the audio files is the same.

However if I open the file on my laptop (i9 MBP), where the files appear to be in the same location (both the mix16pro file and the audio files),

I’m looking for some expert tutoring on MiX16 Pro. It could take place over Zoom. Willing to compensate. 

Please reach out to info@kiteflyerproductions.com

Best 

steve

I created a project with Imix Band 16 (v 8.2) at my Ipad9.

Exported to another Imix Band 16 (v 8.2) by dropbox, audio files by Itunes, Ipad5.

The program keep saying:

“OPEN PROJECT ERROR”

wrong content of the project file (data).

How can I fix it?

I have been successful at sending and receiving OSC commands to and from a custom app.  I would like to break up a song time wise (say during a passage with lighting sounds) and send OSC commands to the app at this point.   I see that you can use cues with empty Durations and use the time to trigger the next one where upon the OSC is sent to the app.  Is this the only way? 

Hi all

Really enjoying getting to grips with ShowCue. I have no experience and even less understanding of OSC commands, and Grega has provided me with great reference documents. I have configured Showcue and it detects my behringer XR18 mixer- so the IP address and output port is correct.

I can now trigger ShowCue to change a channel fader using:

/ch/01/mix/fader, 0.5 as an OSC Output Command - Play Cue

In my Behringer XR18 I have a series of audio snapshots saved for our drama production with different settings for different microphones switched on and off throughout the production.

No

Hi, I'd like to know if it's possible control the Lampy Showtec light controller by Osc with iMix. I bought iMix16 Pro64. Thank you for your time.

I am considering the purchase of Mix16 Pro and have tested Mix16 Go.  A couple of questions arise:

I cannot seem to maximize the screen while inserting and editing cues.  

What is the volume setting for in the Cue editor.  Setting it stop any audio from playing (as opposed to leaving it blank).  Is there a reason for this?

Does the Pro version allow for moving up as well as down a playlist?

When setting the last cue to "end" mode, the playlist goes up to the first cue and plays instead of stopping the project.  

Finally, why is there

Q1. Why is there no sound when I set the music volume(in edit cue) to 100% in the playlist tab and press the go button? (But erase the volume level again, it can play at 100%.)

Q2. Can I specify a slow change or changingtime when going from cue1 (100%) to cue2 (50%) in pls?

I created a a new midi mapping because the program said I could not assign channels in iMix16 Remote mapping.  I have opened it and it is showing up with blue letters, so i am assuming that is the one opened.  I still get the message you cannot assign iMix16 Remote mapping no matter what I try.  What is going on?

I want to output Mix 16Pro 24 discrete Wav files to Dante Virtual Soundcard on a mac running that DVS, Mac OS 12.3.1. The far no success. Has anybody done this? I can only select dante Output from the app, no Dante channels are avail within the app.

Hello!When I use OSC layout which is official web provides, but it just work on "go","pre","next","stop",it doesn't show cue list, loaded flies, and controls volume!How to work it out?I am looking forward to ur reply, thanks!

MIDI QUESTION: I have an iPad mini 5th gen running iOS14.2 and iMix16 32 channels. I would like to connect a MIDI footswitch to simply move back and forth on the Playlist and hit the GO button to cue videos, but I am lacking the knowledge to get this working. I would even be happy to hire someone to help me if I need to. I have a couple AirTurn products including the Airturn BT-200|S-6, as well as a Duo (and use them successfully with other programs like forScore). I have gotten the iMix to recognize the pedal,  but how

I am testing Mix16Pro with a Laserworld ShowNet Ethernet interface, which I have configured to be in its ArtNet mode. I can see from the Ethernet LEDs that data is being transmitted, but nothing happens!

With i/f set to ArtNet, should Mix16 see it? Is there any way of confirming whether it can?

Cheers,

Andy

Hi,

I just bought iMix16 Band on my iPad and I just discovered it doesn't work on iPhones !

IMix16 is great with a NanoKontrol and I wish to use it with a smaller/cheaper device like iPhone 5 or 6.

Is it planned to make it iPhone compatible ?

Thanks

Philippe

getting a warning message. First time, It persisted through the entire show. 

How do i reset memory?  

did the power button and home key hard reset. 

hopefully that resolves it.